We pave walkways for homes, schools, churches, medical campuses, apartment communities, HOAs and parks, and we design them around how people actually use the space.
Walkway Paving Standards: Width, Slope and Accessibility
Walkways should be comfortable and compliant. Residential walkways are often 3 to 4 feet wide, while shared pedestrian routes at commercial properties are typically 5 feet or wider so people can pass and wheelchairs can turn. Accessible routes need cross-slopes of no more than 2 percent and gradual running slopes with landings and ramps where grade changes; we lay these out to current accessibility guidelines and coordinate with your design professionals where plans exist.
Walkway Paving Base: Crushed Rock Subbase for Frost Stability
A pedestrian path does not need a truck-rated section, but it still needs a stable base. We excavate organic soil, install and compact crushed rock, and set elevations so the path does not settle or heave at tie-ins.
Walkway Paving Thickness: How Much Asphalt a Pedestrian Path Needs
Foot-traffic walkways commonly use 2 inches of compacted hot-mix asphalt. Where maintenance vehicles, emergency access or golf carts will use the path, we increase the section or follow our cart path design.
Walkway Paving Drainage: Keeping Paths Clear of Ice and Standing Water
In winter, puddles become ice. We set cross-slopes and edge conditions so melt and rain leave the path, and we flag downspouts, sprinklers and runoff from nearby roofs that can leave a path wet and slick.
Walkway Paving for Commercial and Community Sites: Tie-Ins, Lighting and Edges
Walkways rarely exist alone. They meet curbs, doors, ramps, parking stalls and landscaping, and these tie-ins decide whether the path feels safe. We coordinate transitions to buildings and ramps, protect irrigation and lighting infrastructure, and finish edges so landscaping and soil do not erode onto the pavement. For parking areas that feed these paths, see parking lot paving.
Walkway Paving Process: Layout, Base, Asphalt and Edges
- Route layoutWe stake the route, widths and tie-ins and confirm them with you.
- ExcavationTopsoil and unsuitable material are removed to the planned depth.
- Crushed rock baseBase is placed and compacted for a firm, level platform.
- Grade and slope checkCross-slopes and running slopes are verified for drainage and accessibility.
- Asphalt placementHot-mix is placed with small pavers or by hand for precise edges.
- CompactionRollers or plate compactors densify the mat.
- Edge finishingSoil or aggregate is backfilled along the edges.
Walkways Service Areas: Spokane, Spokane Valley, Liberty Lake, Cheney and Airway Heights
We provide walkways throughout Spokane County. Choose your location to see local conditions, soils and paving considerations for your area.
- Walkways in Spokane, WA
- Walkways in Spokane Valley, WA
- Walkways in Liberty Lake, WA
- Walkways in Cheney, WA
- Walkways in Airway Heights, WA
Walkways FAQ: Answers From a Spokane Paving Contractor
Walkway Paving Material: Why Choose Asphalt Over Concrete?
Asphalt is flexible, quick to install, and usually less expensive. Concrete has its own advantages, so the best choice depends on use and appearance goals.
Walkway Paving Safety: Can Walkways Be Built to ADA Standards?
Yes. We lay out slopes and widths to current accessibility guidelines and coordinate with your design team.
Walkway Paving Timeline: How Quickly Can a Path Be Used?
Most walkways can be used the next day, depending on temperature.